Ghost Immobiliser Fitting
Protect your vehicle from theft of keys hacking, cloning and theft by using the first aftermarket CAN immobiliser. With the option to link to a Ghost app and GPS tracking system that will send you call alerts in the event that your vehicle is damaged with or stolen.
The installation of a Ghost immobiliser can be completed by a trained technician. Making use of the correct tools, insulation tape, and heat shrink tubing are essential.
Getting Started
Ghost immobilisers are a great alternative to physical theft devices such as car alarms and wheel locks. They safeguard your vehicle without using LED indicators or key fobs. Instead, they connect directly to the ECU's CAN data network. They can only be started by entering a PIN sequence. This provides a more secure level of security against key hacking, cloning, and even ECU swapping.
Installing a ghost immobiliser Birmingham requires a high degree of agility and accuracy. It's like walking through a minefield. One misstep could cause serious damage to your vehicle's circuits. It is essential to comprehend the procedure for installing and prepare your vehicle in a timely manner.
The first step is to prepare the vehicle by taking out interior panels to make room for the immobiliser unit. Once you've found the ideal place to conceal it put it in place using cable ties to prevent it from being removed or tampered with. Then, tidy your wiring by tying loose wires down and using insulation tape to cover any exposed connections. This will help to minimize the risk of short circuits that are not intended to be there, while improving the appearance and reducing the chance of tampering from thieves.
Find a reliable source of 12V power, as well as a grounding source for the ghost immobiliser. Once you've located these and tested the power wires using a multimeter to ensure they are delivering a consistent voltage. Connect the CAN H and CAN L wires of the immobiliser to the grounding and power sources.
Once you've made all of the connections required It's crucial to double-check them and inspect the immobiliser for signs of corrosion or damage. Also, test the system to ensure it's functioning properly by entering a pin code and then starting the engine. This should be part of your routine since it allows you to identify any issues that are intermittent early. Regular testing can help increase the longevity of your device and ensure it is running at its peak.
Preparing your vehicle
Installing a Ghost immobiliser requires the right expertise and tools. A wiring diagram is crucial to identify the right wires, making precise connections and ensuring security. A multimeter is a tool to test the electrical properties and ensure security. Cable ties and insulation tape can be used to guard the connections from tampering and to keep them neatly secured. A user manual is available for your Ghost Immobiliser. It will provide you with specific instructions specifically tailored to the model.
Once installed the ghost immobiliser will stop unauthorised engine starts by requiring the driver to enter a unique PIN sequence by pressing buttons on the steering wheel or on the centre console. The code can be altered at any time by the owner by hand or remotely using an app for mobile devices. The device also operates silently and is inaccessible to thieves as it does not emit radio frequency.
ghost immobiliser and tracker are directly connected to the CAN bus of the vehicle, a network which communicates with the electronic control units (ECUs) of the vehicle. It intercepts the signals sent by ECUs and then blocks the engine if a false signal is identified. The system is tamperproof and weatherproof, and does not include key fobs or LED indicators to attract the attention of thieves.
It can be placed behind the dashboard or in an inconspicuous area, so that it isn't seen by thieves and does not interfere with the vehicle's performance. It is also possible to put it inside a small, compact box, making it less likely to be discovered during a test drive by unscrupulous salespeople selling cars.
Its discrete operation and integration with the vehicle's CAN bus network make it an effective deterrent against modern methods of car theft, such as key cloning and signal relay attacks. Combining the system with other security measures will create a powerful barrier that can deter even the most persistent thieves. This is why more insurance companies are recommending or even requiring ghost immobilisers to be fitted, as it will significantly lower the cost of insurance.
Making the Connections
Ghost immobilisers are silent, unlike traditional security systems which can be heard by thieves. They prevent thieves from knowing that your vehicle is running. They also stop high tech methods of stealing vehicles such as OBD hacking. Installing them without leaving permanent marks on your car is an excellent option for those who intend to sell their vehicle in the near future.
The Autowatch Ghost 2 CANbus immobiliser is among the most recent and most reliable options to stop car theft. It blocks your engine through the CAN data network and generates a unique PIN code that is difficult for criminals to guess. It is compatible with many different automobiles, and it can work with all the features that are already in place including car alarms and steering wheel locks. GPS trackers, and door lock bypass.
If you opt to use an Ghost immobiliser for your vehicle, be sure you refer to the wiring schematic to identify the wires to connect. Verify their positions to ensure they're exact, and label them or tape them to help you remember them. You will also need to locate a source of continuous power (12V) and an earthing point for the system. Once you have these in place, you are able to begin to connect the components to complete the installation.
The ghost immobiliser won't allow your vehicle to start until a pin code is entered via the buttons on the steering wheel or dashboard. This will stop ECU hacking or key cloning and other techniques of theft from vehicles. It can also be paired with other Thatcham approved security devices such as alarms and tyre clips to provide your vehicle with an additional security level.
As the UK automotive aftermarket market continues to grow, so do the options to secure your vehicle. There are so many ways that thieves can get into your vehicle and steal it, which is why it's crucial to take every precaution to stop it from being taken away. That's why ghost immobilisers have become an extremely popular option for responsible car owners.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU and prevent the engine from starting until a specific PIN code is entered. This makes it extremely difficult for thieves to steal your key fob to open your vehicle, and more difficult to disable the system by hacking its electronic.
Ghost Immobilisers are also able to be used together with GPS tracking devices that will help you track your vehicle and track it if it's stolen. This is a feature that isn't typically found in aftermarket security products, but it is an excellent option to boost your vehicle's security, and provide you with peace of peace of.
The Ghost-II immobiliser is not just a source of greater security, but also a convenient experience for the user, by getting rid of the need for additional key fobs or devices. It comes with an easy and intuitive PIN code entry system that is seamlessly integrated into your everyday routine. It also has convenience features and deactivation modes that allow you temporarily disable the immobiliser in order to park or service your vehicle.
Prepare the necessary tools and become familiar with the wiring of your vehicle. A basic set of hand tools will give you the flexibility to make precise connections, and a multimeter is a great tool to check electrical values. Insulation tape and heat-shrink tubing are vital to protect connections from short circuits. Cable ties can be used to secure wiring. It is also essential to work in a space that is well-lit and wear safety equipment when working with electrical tools and components.
You should test the Ghost immobiliser after having completed the installation to make sure it's functioning properly. First, you should try to start the vehicle without entering the PIN code. If this fails then you'll need to retest and inspect the connections more thoroughly.
The Ghost Immobiliser, unlike other security systems, is a secret device that cannot be detected by thieves. It is also more efficient than physical deterrents, such as wheel clamps and steering locks. It is TASSA acknowledged and approved by a few insurance companies, making it a cost-effective investment that can give you the peace of mind you need.