Autowatch Ghost 2
Autowatch Ghost 2 is a groundbreaking car immobiliser that safeguards against key-long theft, cloning and relay theft. It's a discreet device that operates in complete silence and requires a unique PIN sequence using buttons already located on the steering wheel or center console.
It is totally undetectable by thieves using diagnostic tools, because it emits radio signals. It's also easy to use as it does not require a tracker or extra fobs.
Cost of installation
A ghost immobiliser is a discrete device that is built into the car's CAN data network and does not require additional fobs, or LED indicators. It's almost indestructible to burglars, and it is based on a different basis from regular car alarms. It prevents the engine from starting unless a specific sequence of buttons are triggered by the owner of the vehicle. This ensures that only the right person can operate the vehicle and decreases the possibility of your joy and pride being stolen.
Ghost immobilisers are cheaper than traditional devices and can be put in place in your vehicle in only several hours by experienced technicians. They can be used on a variety of vehicles, making them an affordable way to increase your car's safety. You can use a ghost-immobiliser along with the tracking system to offer an additional layer of security for your vehicle.
Modern vehicles are easy targets for thieves with sophisticated equipment that can clone remote keys, open the vehicle and steal it. It is important to protect your car with a ghost-immobiliser. It will prevent the car from moving until you press a certain sequence of buttons. This will give you peace of mind when you're giving your vehicle to valet parking or hiring a driver.
The Autowatch Ghost 2 is a cutting-edge car protection system which guards against modern methods of theft like key copying. The small device connects to the CAN system in your vehicle and shuts off the engine after you enter a pin code. This is a discrete and hidden device which is not affected by signal jamming or device spoofing. It also comes with the benefit of sending alerts to your mobile phone in case someone attempts to tamper with your vehicle.
The Autowatch Ghost 2 immobiliser is priced at just PS499 with VAT and can be installed within a couple of hours at your workplace or at home by one of our highly skilled TASSA (Autowatch) registered DBS-security-checked installers. It is a high-tech and low maintenance device that can be easily moved from vehicle to car and is compatible with the majority of CAN-bus systems.
Cost of replacement keys
The Autowatch Ghost offers advanced protection against key-cloning hacking and theft. It's designed to work without the need for additional key fobs or LED indications and it works with all modern vehicles. Our certified technicians can install it in most cars and vans within just a few hours. The system can also be integrated with car trackers to make it even more secure.
The system is linked to your vehicles CAN data network, making it undetectable to thieves. This means that it will not trigger any diagnostic lights, as there are no radio signals. The criminal will also not be able access the OBD port on your vehicle, as it is linked directly to the ECU (Engine Control Unit). This will stop the thief from adding new key fobs or replacing the ECU which normally allows them to start the vehicle.
The ghost immobiliser is also completely sealed and concealed within the harness of the vehicle. ghost car immobiliser makes it almost impossible for thieves to locate. The system generates a unique pin code using the buttons on the steering wheel or dash. The code must be entered to start the vehicle. Monty's can also be programmed to operate in a Service/Valet mode that allows you to temporarily start the car without entering the PIN code. This is useful if you're transferring your vehicle to a mechanic or valet parking service.
If the PIN code sequence has not been entered, the CAN Ghost will prevent the vehicle from moving, or stall the engine and gear box - dependent on your vehicle's specific needs. It can be connected to a vehicle tracker so you can see the location of your vehicle on a map using any internet-enabled gadget.
The system is simple to install, and can be moved between vehicles. This makes it a great option for classics as well as sports automobiles. It doesn't require batteries or power cables since it is wired directly into the CAN network in your car. It is virtually undetectable and is installed in a few hours by one of our TASSA certified, DBS security checked and certified technicians.
Cost of replacing a car
Autowatch Ghost immobiliser is a cutting-edge technology that offers advanced protection against hacking and key cloning. It works by integrating directly with the vehicle's ECU creating a wall that is virtually impossible to breach without the proper PIN code. Furthermore the system is TASSA verified and insurance approved which makes it a great choice for those who want to improve their car's security. This system can help you save money on car insurance as most insurers give discounts to cars that use this system.
The Ghost system is unnoticeable to thieves and operates silently without radio signals. It connects to the vehicle's CAN network, and requires an unique PIN code to allow you to start your vehicle. It also stops hackers from gaining access to the system via diagnostic scans or tampering with the OBD port on your car. Additionally, the device utilizes an exclusive algorithm to detect and disable cloned keys.
Although it is possible to install Ghost immobilisers on your own but the process can be dangerous. It is best to have it done by a certified professional. Incorrect installation could cause damage to your vehicle's wiring and render the device useless. DIY installations can also invalidate the warranty on your vehicle and device.
The majority of Ghost users have high levels of satisfaction with the device. They appreciate the added layer of security and peace of mind it brings to their lives. Additionally, the device is easy to use and discreet in appearance. Most of them are happy with the fact that it will secure their vehicle from theft when keys are lost.
However there have been some complaints from customers who have experienced problems with the device's stop/start function. This could be due to an improper configuration or a problem independent of the Ghost immobiliser. However, these problems are very rare and can be easily resolved by contacting the company that installed the Ghost.
A professional Ghost installation is recommended, because the device can be costly to repair or replace if damaged by a skilled hacker. The best way to avoid this is to ensure that the installer is licensed and has a good track record. A reputable and vetted installer will have a strong commitment to customer satisfaction and will be able to guarantee the quality of their work.
Costs for insurance
A ghost immobiliser is an anti-theft device which stops thieves from starting your vehicle. It works by connecting with the car's CAN data network and generating an individual code sequence. This sequence must be entered prior to the start of the engine. The device is able to be transferred between vehicles, and it does not require power cables or batteries. It also works with a range of car alarms, meaning it can be used as a standalone security measure or as an supplement to a traditional alarm system. It can be programmed to work with the new car you intend to trade or sell your car in the future.
The autowatch ghost is immobiliser that can be easily installed and is not detectable by thieves. It uses the buttons on your car to input your PIN code. This makes it difficult for thieves find its presence. It is also highly robust and weatherproof, meaning it is able to endure any kind of environmental condition. This makes it ideal for classic, sports and luxury vehicles that require battery isolation during long periods of time.
This cutting-edge technology stops signal copying and door lock pick set bypasses by connecting directly to the car's CAN network. It is a TASSA-verified immobiliser that is recognized by insurance providers as a theft deterrent. It also has a unique feature, Stealth Active. This is unnoticeable by key cloning devices.
In contrast to other immobilisers for cars, the Autowatch ghost is a low-maintenance option that requires no wiring, so it doesn't interfere with the vehicle's electrical system or aesthetics. The installation process is easy and can be performed by a skilled technician. It is important to keep in mind, however, that the device could be damaged if it is installed incorrectly. It's important to hire an expert to install the device to protect your vehicle.
While many opt to install a ghost ignition system themselves but it's best to seek help from a professional in the event you're thinking about this option. If you attempt to install it yourself, it could lead to a myriad of issues, including misconnecting wires and causing electrical problems. A wrong placement could make the device useless, or visible to thieves. It's a good idea to combine an immobiliser with other security measures, such as GPS tracking and alarm systems. This increases the chances of receiving a lower insurance premium.